|
Open the Windows NT Control Panel. Double
click Network, then Services.
Select Remote Access Service, click Properties
button. Note: If you do not have Administrative Privileges then
you will not be allowed to edit these properties.
Select your modem from the list. If your modem is
not listed, you'll need to add it.
Click the Network... button to open Network
Configuration. Make sure that TCP/IP is the only selected
Dialout Protocol. Uncheck any other protocols.
Click OK to close the Network Configuration
window, then click Continue button to close the Remote Access
Setup window, then click OK button to close the Network control
panel.
Next...Setting up the Dialup
Connection
|
home 
